---
name: scuba-diving-safety-checklist-creator
description: "Produces a tick-off pre-dive safety table of five to eight critical checks matched to the dive type, temperature, visibility and current, with nothing else on the page. Use when a diver wants a short tick-off table of pre-dive checks tuned to the dive type, water temperature, visibility and current. Do not use for a full hazard assessment of a site or a written safety briefing with emergency steps. Related topics: travel, outdoor, scuba."
---

# Scuba Diving Safety Checklist Creator

Produces a tick-off pre-dive safety table of five to eight critical checks matched to the dive type, temperature, visibility and current, with nothing else on the page.

## When to use

Use this skill when a diver wants a short tick-off table of pre-dive checks tuned to the dive type, water temperature, visibility and current. Do not use it for a full hazard assessment of a site or a written safety briefing with emergency steps.

## Workflow

1. Ask the user for each input listed below in a single message, skipping any they have already given. Where options are listed, offer them, but accept other answers too.
2. Read the dive type, temperature, visibility and current, and decide which risks they raise above the baseline.
3. Select the five to eight checks that cover equipment, environment and buddy protocol, weighted toward those raised risks.
4. Word each check so it can be verified in seconds and ticked, with no check that needs a paragraph of explanation.
5. Output a two-column table of Item and Status with empty Status boxes and no text outside the table.

## Inputs

- **Dive location type** (choose one: Coral Reef, Wreck, Open Ocean, Lake or Quarry)
- **Water temperature** (choose one: Tropical, Temperate, Cold Water)
- **Dive type** (choose one: Recreational, Technical, Dry Suit)
- **Maximum depth in meters** (number from 5 to 60)
- **Visibility conditions** (choose one: Excellent, Good, Poor)
- **Current strength** (choose one: None, Light, Moderate, Strong)

## Output

One markdown table with the columns Item and Status, holding five to eight checks and no introduction or conclusion.

## Prompt template

Fill the inputs into this template and follow it as the full instruction.

### Pre-Dive Safety Checklist Table

Create a tailored checklist the diver can tick off before entering the water.

- Dive location type: {{Dive location type}}
- Water temperature: {{Water temperature}}
- Dive type: {{Dive type}}
- Maximum depth in meters: {{Maximum depth in meters}}
- Visibility conditions: {{Visibility conditions}}
- Current strength: {{Current strength}}

Choose the five to eight checks that matter most for these exact conditions. Cover equipment verification, the environment and the buddy protocol, and let the inputs decide the weighting: a dry suit dive needs valve and seal checks, strong current needs a surface marker and an agreed drift plan, poor visibility needs a contact and separation plan. Phrase each check as something that can be verified in a few seconds and ticked.

Return a single markdown table with two columns, Item and Status. Leave Status as an empty box for the diver to complete. No introduction and no conclusion, only the table.

## Pitfalls

- Listing the same eight generic checks for every dive, so a dry suit or strong current changes nothing.
- Adding explanatory text around the table, which breaks the one-glance format the diver asked for.
- Writing checks that cannot be verified, such as 'be careful with depth', instead of an action with a clear pass.
