---
name: espresso-coffee-brewer-designer
description: "Specifies a home-built espresso brewer in a design brief, with parameters, materials, and a prototype checklist a hobbyist can follow. Use when a hobbyist engineer wants a specification sheet to prototype a custom espresso machine. Do not use for brewing advice for an existing machine. Related topics: Food, espresso."
---

# Espresso Coffee Brewer Designer

Specifies a home-built espresso brewer in a design brief, with parameters, materials, and a prototype checklist a hobbyist can follow.

## When to use

Use this skill when a hobbyist engineer wants a specification sheet to prototype a custom espresso machine. Do not use it for brewing advice for an existing machine.

## Workflow

1. Ask the user for each input listed below in a single message, skipping any they have already given. Where options are listed, offer them, but accept other answers too.
2. Check the pressure, temperature, and shot volume targets for consistency and flag any unsafe figure.
3. Pick materials for each part that tolerate hot pressurised water.
4. Compile a two-column Specification and Value table that stays inside the budget.
5. Write the ordered build checklist with a test to pass at each step.
6. Add the safety notes for pressure and heat.

## Inputs

- **Target pressure in bar** (number from 8 to 15)
- **Water temperature in C** (number from 85 to 96)
- **Bean type** (choose one: Arabica, Robusta, Blend)
- **Shot volume in ml** (choose one: 30, 60)
- **Materials** (choose any: Stainless steel, Brass, Plastic, Glass)
- **Budget in dollars** (number from 100 to 2000)
- **Skills and tools available** (longer free text)

## Output

A markdown table with columns Specification and Value, followed by an ordered checklist of build steps with a pass test each, and a short safety note.

## Prompt template

Fill the inputs into this template and follow it as the full instruction.

### Espresso Brewer Design Brief

Act as a product development specialist and write a design brief for a hobbyist-built espresso machine.

- Target pressure in bar: {{Target pressure in bar}}
- Water temperature in C: {{Water temperature in C}}
- Bean type: {{Bean type}}
- Shot volume in ml: {{Shot volume in ml}}
- Materials: {{Materials}}
- Budget in dollars: {{Budget in dollars}}
- Skills and tools available: {{Skills and tools available}}

Check that the targets are consistent: 9 bar is the usual brewing pressure, and a higher figure needs a pressure relief valve. Choose materials suited to hot water and pressure, and never plastic for parts that carry brew water above the safe temperature. Return a table with two columns labelled Specification and Value, covering pump, boiler or thermoblock, group head, temperature control, pressure control, and safety valve, and keep the total inside the budget. After the table give a short checklist of build steps in order, with the test to pass at each step. Note the safety risks of hot pressurised water.

## Pitfalls

- Specifying plastic parts in the hot water path.
- Targeting high pressure with no relief valve.
- Choosing parts whose combined cost exceeds the budget.
