---
name: scuba-diving-safety-route-builder
description: "Lays out a recreational dive as a step-by-step profile table of depth, time and action, with safety stops, gear checks and emergency protocols that respect the diver's certification. Use when a recreational diver wants the dive laid out step by step, with depth, time and action for each stage from descent to surface. Do not use for a hazard assessment, a plain-text briefing or any technical or decompression dive. Related topics: travel, outdoor, scuba."
---

# Scuba Diving Safety Route Builder

Lays out a recreational dive as a step-by-step profile table of depth, time and action, with safety stops, gear checks and emergency protocols that respect the diver's certification.

## When to use

Use this skill when a recreational diver wants the dive laid out step by step, with depth, time and action for each stage from descent to surface. Do not use it for a hazard assessment, a plain-text briefing or any technical or decompression dive.

## Workflow

1. Ask the user for each input listed below in a single message, skipping any they have already given. Where options are listed, offer them, but accept other answers too.
2. Cap the maximum depth at the recreational limit for the certification and record any reduction from the request.
3. Sequence the dive from entry through descent, working phase, turn point, ascent, safety stop and surface.
4. Give every step a depth, a duration and an action, and confirm the cumulative time stays within the bottom time.
5. Adjust the profile for the stated temperature and visibility, such as a shorter plan in cold water.
6. Add the safety checklist beneath the table with the emergency contact and a note that the dive computer governs the limits.

## Inputs

- **Dive site** (free text, e.g. "Great Barrier Reef")
- **Desired maximum depth in meters** (number from 5 to 40)
- **Planned bottom time in minutes** (number from 10 to 60)
- **Diver certification** (choose one: Open Water, Advanced Open Water, Rescue Diver, Divemaster, Instructor)
- **Water temperature in Celsius** (number from 5 to 32)
- **Visibility in meters** (number from 3 to 40)
- **Emergency contact phone** (free text, e.g. "+1 555 123 4567")

## Output

A markdown table with columns Step, Depth (m), Time (min) and Action in dive order, followed by a bullet-point safety checklist.

## Prompt template

Fill the inputs into this template and follow it as the full instruction.

### Dive Profile Planner

Act as a dive safety planner. Build the plan for a single recreational dive as an ordered sequence of steps.

- Dive site: {{Dive site}}
- Desired maximum depth in meters: {{Desired maximum depth in meters}}
- Planned bottom time in minutes: {{Planned bottom time in minutes}}
- Diver certification: {{Diver certification}}
- Water temperature in Celsius: {{Water temperature in Celsius}}
- Visibility in meters: {{Visibility in meters}}
- Emergency contact phone: {{Emergency contact phone}}

Cap the depth at the certification's recreational limit and say so when the request is lowered. Build the profile from entry to exit: descent, the working part at depth, the turn point by gas pressure, the ascent with a safety stop and the surface. Give each step a depth, a time and an action, with the cumulative time so the total never exceeds the bottom time. Let temperature and visibility change the plan, for example a shorter dive in cold water or a tighter buddy distance in low visibility. State that the dive computer governs actual limits.

Return a markdown table with the columns Step, Depth (m), Time (min) and Action, then a bullet-point safety checklist below it that includes the emergency contact.

## Pitfalls

- Letting step times add up to more than the planned bottom time, so the table contradicts the plan.
- Planning to the requested depth when the certification limit is shallower.
- Leaving the safety stop out of the ascent, or placing the turn point by time instead of gas pressure.
